Daily Tips

Four Working Ways To Fix iPad Stuck in Boot Loop (2024 update)

“Why does my iPad keep rebooting after crashing 30 minutes ago? It’s stuck in a loop where it just shows Apple logo repeatedly. Any ideas on how to fix this?”

An iPad getting stuck in a boot loop is an uncommon issue but can happen due to viruses, low battery, charging issues, or outdated software. However, letting it continue can harm your iPad and cause data loss. So, it’s critical to fix this glitch right away. Fortunately, this article offers four effective methods to stop your iPad from constantly restarting. Read on for the solutions and fix ‘iPad keeps restarting’ error in no time!

Here are five methods described in detail to fix ‘iPad stuck in boot loop’ issue. Try them out one by one starting with hard resetting your iPad and moving on to more advanced solutions like putting it in DFU mode to fix its boot loop problem.

Watch this video to fix “iPad stuck in boot loop” without data loss: 

  1. Hard Reset Your iPad to Fix iPad Stuck in Boot Loop

Doing a hard reset can fix an ‘iPad turning on and off loop’ by clearing device’s memory and stopping background tasks causing the problem. Here are steps for performing a hard reset for both an iPad with a Home button and one without a Home button:

For iPad with a Home button:

Press and hold both Power and Home buttons together for about 30 seconds until your iPad restarts.

For iPad without a Home button: 

Step 1: Press and quickly release Volume Up button, then do same with Volume Down button. 

Step 2: After that, hold down Power button until you see Apple logo appear.


  • It won’t fix boot loop issue if it’s due to an iOS glitch.
  1. Fix iPad Stuck in Boot Loop With Reiboot iOS System

If your iPad will not come out of recovery mode or is stuck in a boot loop you can fix it with an app like Tenorshare ReiBoot. It’s a powerful tool for repairing iOS device issues like being stuck in a boot loop, recovery mode, Apple logo, black screen, etc without data loss. But that’s not all that this tool offers. It can provide more such as:

  • Repair 150+ iOS issues without data loss.
  • Fix other common iPad and iTunes errors.
  • Enter/exit recovery mode in one click.
  • Reset iPad without password or iTunes/iCloud backup.
  • Helps upgrade/downgrade iOS including Betas.
  • Compatible with old and current iOS 17 Beta.
  • 3 repair modes for repairing complex iOS issues.

Here’s how to use Tenorshare ReiBoot to fix an iPad stuck in boot loop:

Step 1: Download and install iOS repair tool on your computer, plug in your iPad, and launch tool on your PC. Press “Start Repair” once ReiBoot recognizes your iPad.

Step 2: Click “Download” to download latest firmware package necessary for repairing your iPad.

Step 3: Choose “Standard Repair” and wait for ReiBoot to fix ‘iPad keeps turning on and off’ issue. Once it’s finished, press “Done.”

  1. Restore iPad via iTunes to Fix iPad Stuck in Boot Loop 

Sometimes, your iPad gets stuck in a boot loop after an update. If you have a backup of your iPad on iTunes, the good news is you can restore last working version of iOS from there. Follow steps below to do that:

Step 1: Plug your iPad into your computer and launch iTunes.

Step 2: Choose your iPad from iTunes and click on “Summary.”

Step 3: Hit “Restore iPad” and then confirm by clicking “Restore” again.


  • This will wipe away all data on your iPad.
  • You can’t use this method if you don’t have a backup on iTunes.
  1. Enter DFU Mode to Repair iPad Keeps Turning Off and On

If your iPad freezes on Apple logo, and you can’t connect to iTunes, another way to fix it is by entering into DFU (Device Firmware Update) mode. It lets you fully rewrite iPad’s firmware, even baseband responsible for cellular connections, which Recovery Mode might not fix. 

This is useful for low-level software glitches. Sometimes, DFU mode can also repair hardware-related firmware issues that Recovery Mode can’t handle. Here’s how to enter DFU mode:

Step 1: Plug your iPad into your computer and launch iTunes.

Step 2: Follow commands below to enter DFU mode depending on whether your iPad has a Home button or not:

For iPad with a Home button:

  • Press and hold both “Home” and “Power” buttons for 10 seconds. Then release “Power” button but keep holding “Home” button for 5 seconds.

For iPad without a Home button:

  • Press “Volume Up,” then “Volume Down” button. Next, press and hold “Power” button until screen goes black.
  • Press “Volume Down” button while still holding “Power” button for 5 seconds. Then release “Power” button but keep holding “Volume Down” button for 5 more seconds.

Step 3: If your iPad screen stays black, it’s in DFU mode. Find your iPad in iTunes and click “Restore iPad” to fix it.


  • The DFU mode is riskier as it requires a precise combination of button presses and timing.
  • It will erase all data from your iPad.

Hot Questions

Q1: How to fix an iPad boot loop while low battery or charging?

If your iPad is stuck in a boot loop due to low battery or charging issues, here’s how to fix it:

Step 1: Plug your iPad into charger and it will reboot, showing Apple logo.

Step 2: As soon as you see Apple logo, unplug charger quickly and watch for your Home screen to briefly appear.

Step 3: Next, immediately plug charger back in as Home screen flashes. The screen will go black and your iPad shouldn’t reboot again.

Step 4: Charge your iPad for at least 30 minutes, then try turning it on again to see if boot loop error has stopped.

Q2: How to fix a boot loop without a factory reset?

You can fix a boot loop error without a factory reset with help of Tenorshare ReiBoot. It can repair 150+ iOS issues with guaranteed success and without data loss.

Q3: How to fix an iPad boot loop without a computer?

To fix an iPad boot loop issue without a computer try a hard reset. If that doesn’t solve problem check whether its battery is low or it has charging issues. As most often than not these can cause your iPad to stuck in a boot loop.

The Bottom Line

So there you have it – four effective ways to fix your iPad stuck in boot loop. While each solution has its pros and cons, some may lead to data loss. However, if you’re looking for a reliable fix without risking your iPad data, Tenorshare ReiBoot can be your top choice. With this powerful iOS repair tool, you can rest assured your iPad will be back up and running in no time, free from an endless cycle of rebooting.

Dennis Sellers
the authorDennis Sellers
Dennis Sellers is the editor/publisher of Apple World Today. He’s been an “Apple journalist” since 1995 (starting with the first big Apple news site, MacCentral). He loves to read, run, play sports, and watch movies.