If you’re here, chances are your iPhone is stuck in a boot loop, repeatedly showing the Apple logo and restarting. It’s frustrating, but rest assured, you’re not alone—and most importantly, there’s a way out. In this guide, we’ll walk you through the most effective solutions to fix your iPhone when it’s stuck in a boot loop. Let’s dive in and get your iPhone working again!
What is an iPhone Boot Loop?
An iPhone boot loop occurs when your device gets stuck in a continuous cycle of restarting. Instead of fully powering on and reaching the home screen, the iPhone repeatedly shows the Apple logo for a few seconds before restarting. Essentially, the device keeps attempting to boot up but fails to complete the process, leaving it stuck in this endless loop.
Software glitches, low storage, and hardware failures can cause the iPhone to get stuck in a boot loop. If the issue arises suddenly, or after an iOS update or factory restore, it’s typically due to a software glitch. However, if it follows a drop, water damage, battery replacement, or screen replacement, it may point to a hardware issue. Regardless of the cause, there are methods available to help resolve the boot loop and get your iPhone back to normal.
Method 1: Get iPhone Out of Boot Loop by Force Reboot
The first step to take when your iPhone is stuck in a boot loop is to perform a force restart. This action can clear out minor software glitches that may be causing the issue, interrupting the continuous cycle of reboots and allowing the device to move past the Apple logo and complete the boot-up sequence. A force restart doesn’t erase your data, making it a safe and quick solution to try before attempting more advanced fixes.
Here’s how to force restart different models:
iPhone 8 and later: Press and release the Volume Up button, then the Volume Down button, and finally, press and hold the Side button until the Apple logo appears.
iPhone 7 and 7 Plus: Press and hold both the Volume Down and Side buttons until the Apple logo appears.
iPhone 6s and earlier: Press and hold both the Home and Sleep/Wake buttons until the Apple logo appears.
Once the Apple logo shows up, your iPhone should get out of the boot loop and restart normally. If this doesn’t resolve the issue, you can proceed with other troubleshooting methods.
Method 2: Fix iPhone Boot Loop with iSumsoft iOS Refixer
If a force reboot doesn’t help and your iPhone is still stuck in the boot loop, consider using iSumsoft iOS Refixer to fix the issue. This is a professional and reliable iOS repair tool designed to fix various iPhone system issues, including boot loops, without risking data loss.
Here is how to use iSumsoft iOS Refixer to fix the boot loop:
Step 1: Download and install iSumsoft iOS Refixer on your computer (compatible with both Windows and macOS).
Step 2: Connect your iPhone to your computer using a USB cable.
Step 3: Boot your iPhone into recovery mode. To do this, follow the same steps as a force restart, but instead of releasing the buttons when the Apple logo appears, keep holding them until the recovery mode screen shows up.
Step 4: In iSumsoft iOS Refixer, select the System Repair option.
Step 5: Choose Standard Mode. This mode can fix most common iPhone issues without erasing any of your data.
Step 6: Click Start to confirm that you want to continue.
Step 7: Click Next, and the software will automatically detect your iPhone.
Step 8: When prompted to download the firmware for your iPhone, click Download and wait for the download to complete.
Step 9: Once the firmware is downloaded, click Repair to starting repairing your iPhone.
Step 10: When prompted that the repair is successful, the boot loop issue should have been resolved, and your iPhone should restart normally. You can then verify that the device is working properly and that your data is intact.
Method 3: Fix iPhone Stuck in Boot Loop with iTunes/Finder
If you prefer not using a third-party solution, you can try using iTunes (on PC) or Finder (on Mac) to fix the iPhone stuck in boot loop.
Step 1: Connect your iPhone to your computer using a USB cable, and boot your iPhone into recovery mode.
Step 2: Open iTunes (on Windows) or Finder (on Mac) and select the Update option.
Step 3: If prompted, follow the on-screen instructions to confirm your decision, and iTunes/Finder will then download and install the latest iOS version on your iPhone.
Step 4: Allow the update to finish, and once it’s complete, your iPhone will restart. Check to see if the boot loop issue has been resolved.
Step 5: If the update doesn’t fix the issue and your iPhone remains in the boot loop, put your iPhone into recovery mode again and select “Restore” in iTunes/Finder. This will erase your iPhone and install a fresh version of iOS, which should fix the boot loop issue.
Method 4: Contact Apple Support to fix iPhone Boot Loop
If your iPhone is still stuck in a boot loop after trying the previous methods, the next step is to contact Apple Support for assistance. Apple Support can provide expert guidance and help determine if there’s a deeper software issue or hardware problem that requires professional repair. In some cases, they may recommend visiting an Apple Store or an authorized service provider for a more thorough diagnosis and potential repair.
Here’s how to contact Apple Support:
- Visit the Apple Support Website: Go to the Apple Support website and select your device model.
- Choose a Support Option: You can opt for live chat, phone support, or schedule a Genius Bar appointment at an Apple Store.
- Describe the Issue: Provide detailed information about your boot loop issue and the troubleshooting steps you’ve already tried.
- Follow Their Recommendations: Apple Support may guide you through additional troubleshooting steps or advise you on sending your iPhone in for repair if the issue is hardware-related.
Reaching out to Apple Support is the best way to get professional assistance if your iPhone’s boot loop issue cannot be fixed with basic troubleshooting or software tools.
FAQs:
Q: Can a bad battery cause a boot loop on iPhone?
A: Yes, a bad or damaged battery can potentially cause an iPhone to get stuck in a boot loop. If the battery is not supplying stable power to the device, it may lead to irregular restarts or prevent the iPhone from properly booting up, causing it to get stuck in a cycle. In such cases, you may have to replace the battery to fix the issue.
Q: Can water damage cause boot loop on iPhone?
A: Yes, water damage can lead to a boot loop on an iPhone. Exposure to moisture can affect internal components, including the logic board and battery, disrupting normal operations. If water has damaged the iPhone, it may cause a range of issues, including a boot loop, and in such cases, professional repair may be necessary to fix the device.
Conclusion
An iPhone stuck in a boot loop can be incredibly frustrating, but with the right tools and knowledge, it’s a problem that can be solved. Whether you opt for a simple force restart, a restore via iTunes/Finder, or a powerful third-party tool like iSumsoft iOS Refixer, there’s a solution for every situation. Remember to back up your data regularly to avoid losing important information, and don’t hesitate to seek professional help if needed.
By following the steps outlined in this article, you’ll be well-equipped to tackle the boot loop issue and get your iPhone back to its normal, functional state. Happy troubleshooting!
